HobbyKing
TURNIGY SERVO TESTER
| Size | 49x43x29mm |
| Input | 4.8 ~ 6V |
5 Reviews
HobbyKing
TURNIGY 480L V-SPEC INRUNNER W/ IMPELLER 2150KV
| Diameter of shaft | 4mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 2150kv |
| Max current | 60A |
| No load current | 2.0A |
| Internal resistance | 25.60ohm |
| Data | 4S 14.8V |
| Max Current | 25.5A, 33.2A, 46A |
| Pull | 870g, 1080g, 1320g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 57mm x 30mm, 70mm(with shaft), Weight:, 143g (kv1500) (not including connectors), Lamination thickness: ., Prop:, APC6x4, APC6x6.5, APC7x4,
High torque inrunner, excellent for running propellers directly without needing ...5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 40MM BLUE (1MTR)
| Length | 1meter |
| Diameter | 40mm |
Shrink ratio: 2:1,
Great for protecting battery cells, plugs or covering an ESC. ...5 Reviews
HobbyKing
TURNIGY 380L V-SPEC INRUNNER W/ IMPELLER 2600KV
| Diameter of shaft | 4mm |
| Length of front shaft | 14mm |
| Battery | 3 Cell 11.1 |
| RPM | 2600kv |
| Max current | 50A |
| No load current | 1.8A |
| Internal resistance | 20.72ohm |
| Prop | 6x4, 8x3.8 |
| Max Current | 45A, 49A |
| Pull | 1100g, 1400g |
Dimension:, 28mm x 56mm, 70mm(with shaft), Weight:, 131g (kv2600) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
TURNIGY MEGABEC 8
: 7.2v (2 cell Lipoly), : 6v or 5v selectable., Max Load:8A, : 46g,
Zero-interference linear BEC. This unit can handle up to 8A ...5 Reviews
HobbyKing
TURNIGY 540S V-SPEC INRUNNER W/ IMPELLER 1100KV
| Diameter of shaft | 5mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1100kv |
| Max current | 45A |
| No load current | 2.1A |
| Internal resistance | 75.2ohm |
| Data | 4S 14.8V |
| Prop | 8x3.8, 9x4.5, 10x5 |
| Max Current | 24A, 29.4A, 35.5A |
| Pull | 1300g, 1570g, 1780g |
| ESC | 60A |
Dimension:, 52mm x 36mm, 66mm(with shaft), Weight:, 141g (kv1100) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
TURNIGY 2205 50TURN 1088KV 8A OUTRUNNER
| Operating Current | 2A ~ 6A |
| Suggested prop | 9x3.8 or 9x4 |
| Suggested Battery | 1000mAh 3S1P |
| Weight | 30g |
| Dimensions | 27.6 x 22mm |
| Shaft Size | 3.175mm |
Kv: 1088rpm/v, Peak Current: 8A,
A good motor for small parkflyers or shockies. Swinging a ...5 Reviews
HobbyKing
TURNIGY G32 BRUSHLESS OUTRUNNER 770KV
| RPM | 770kv |
| Max current | 42A |
| No load current | 10V/2.4A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.02 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 72x42mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 212g (not including connectors),
Designed to be a direct swap out for your 32 ...5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (880KV)
| Weight | 363g |
| Voltage | 4~8S |
| Max Current | 90A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21.5mm |
| ESC | 100A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:880rpm/V, Turns:8T,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 14MM BLACK (1MTR)
| Length | 1 Meter |
| Diameter | 14mm |
Shrink ratio: 2:1,
A perfect sized heat-shrink tube for bundling wires, or covering ...5 Reviews
HobbyKing
TURNIGY HEAT SHRINK TUBE 10MM YELLOW (1MTR)
| Length | 1 Meter |
| Diameter | 14mm |
Shrink ratio: 2:1,
10mm shrink tube, great for covering wires and connectors. 10mm ...5 Reviews
HobbyKing
TURNIGY PARK300 BRUSHLESS OUTRUNNER 1380KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1380kv |
| No load current | 8V/0.4A |
| Current capacity | 9A/15sec |
| Internal resistance | 0.33 ohm |
| Weight | 24g (not including connectors) |
| Diameter of shaft | 3mm |
| Dimensions | 37x28mm |
Max current: 7A,
Designed to provide reliable and clean power for 3D parkflyers. ...5 Reviews
HobbyKing
TURNIGY 1220 BRUSHLESS INRUNNER MOTOR 10300KV
| Diameter of shaft | 1.48mm |
| Length of front shaft | 7mm |
| Battery | 1 Cell 1S/3.7V |
| RPM | 10300kv |
| No load current | 3.7V/0.4A |
| Current capacity | 7A/15sec |
| Internal resistance | 0.342ohm |
| Dimensions | 12x22mm |
| Thrust | 19200 |
| Max Current | 4.3A |
| Battery Type | 1S Only |
Dimension:, 22mm x 12mm, 30mm(with shaft), Weight:, 8.4g (kv10300) (not including connectors), Lamination thickness: ., Max current:6A, Prop:2, ESC:7A,
2mm Spec. Suited for Mini EDF or micro brushless cars.5 Reviews
HobbyKing
TURNIGY 500 H3126 BRUSHLESS OUTRUNNER 1300KV
| Model | 3126 |
| Cells | 2~6S |
| No load Current | 3A/10V |
| Max power | 1500W |
| Weight | 186g |
| Shaft diameter | 5mm |
| Dimensions | 37.2 x 47.5mm |
| Recomended ESC | 2~6S/70A |
Turns: 5, Kv: 1300rpm/V,
This motor is specifically designed for the 500 helicopter range ...5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 2100KV
| Model | 2218 |
| Cells | 2~4S |
| No load Current | 1.9A/10V |
| Max power | 500W |
| Weight | 67g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 36.5mm |
| Recomended ESC | 2~4S/50A |
Turns: 6, Kv: 2100rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews